DVO Topaz Trunnion 2020 Enduro 205x60

$500.00

Product information "DVO Topaz T3 Air Trunnion Mount Rear Shock 205x60mm"
DVO Topaz T3 Air Trunnion Mount Rear Shock 205x60mm
 
DVO Suspension is a fixture in the suspension system market.
Years of experience and absolutely clean processing of the products lift the dampers off the mass market.
Green anodized knobs are a visible trademark from afar.
 
Cooling fins on the expansion tank ensure consistent performance even when it comes down to it ultra-hard.
Another highlight is the construction of the air chamber, where you can reduce by volume spacer the positive or negative air chamber.
By reducing the positive air chamber you can increase the progression of the damper, are installed in the large negative air chamber spacers then changes the characteristic of the damper. Thus, influence on the linearity can be taken.
 
Air volume is easily tunable via air volume spacers that can be removed or installed in a matter of minutes. Unmatched small bump compliance and damping is achieved from a bladder and loader style compression unit. Cooling fins on the reservoir allow heat to effectively dissipate from the shock keeping temperatures low and damping consistent. The T3 Compression adjust gives you three compression settings for pedaling, traversing, and descending.
 
Tech Sheet
Installation length: 205mm
Stroke: 60mm
Installation dimension: Metric
Diameter air chamber: approx. 50mm
Diameter piston rod: approx. 28mm
Application: Trail, Enduro
Rebound: Yes, externally adjustable
Pressure level: Yes, external 3-fold, open, medium, firm
Damping: air pressure adjustable depending on rider weight
Weight: about 420g
Color: black with green anodized knobs
Tuning: Air chamber tuning, Shim layout to fit the main piston, volume spacers for various kinematics